The Carving Path: New tutorial - The Carving Path

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

New tutorial Panel Ring

#1 User is offline   Hans Meevis 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 48
  • Joined: 09-June 07
  • Gender:Male
  • Location:St Maarten Netherland Antillies

Posted 12 November 2007 - 12:47 AM

Ok so this is not carving as such, but it is metal work. Janel, I won't mind if you kill this post because is is not truly carving as such. :P
I put a three part tutorial on my site for some of my intermediate students on how to make a panel ring a little while ago.
Go check http://www.meevis.co...-class-list.htm and scroll down to Panel ring 1,2 or Mold.

#2 User is offline   Janel 

  • Administrator
  • PipPipPip
  • Group: Admin
  • Posts: 3,237
  • Joined: 12-January 05
  • Gender:Not Telling
  • Location:Minnesota, USA

Posted 12 November 2007 - 05:04 AM

Thank you Hans for the link to those tutorial pages. One could see those lessons as preparation for rings ready for carving upon. :P Really, don't worry about it. The tutorials are interesting. To carve upon, or from, any material one must set the stage for the carving. With metal work, you likely would not simply start from a lump of gold or silver as one does with a piece of wood or mammoth ivory, right? Even those materials must be gotten into the starting dimensions for a piece.

Thank you again, for sharing your knowledge with us.

Janel
Teachers open doors, you enter by yourself. Chinese proverb
What you can do, or dream you can, begin it; Boldness has genius, power and magic in it. ~ Goethe ~

Janel Jacobson's web site
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users