The Carving Path: My glass engraving. - The Carving Path

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

My glass engraving.

#1 User is offline   Dmitrij 

  • Member
  • PipPip
  • Group: Members
  • Posts: 21
  • Joined: 14-July 10
  • Location:Latvia Riga

Posted 28 July 2010 - 12:22 PM

My work's with glass..
Attached Image: monthly_07_2010/post-2554-1280319599.jpg
Attached Image: monthly_07_2010/post-2554-1280319579.jpg
Attached Image: monthly_07_2010/post-2554-1280319603.jpg
Attached Image: monthly_07_2010/post-2554-1280319608.jpg
Attached Image: monthly_07_2010/post-2554-1280319618.jpg
Attached Image: monthly_07_2010/post-2554-1280319632.jpg
Attached Image: monthly_07_2010/post-2554-1280319636.jpg
Attached Image: monthly_07_2010/post-2554-1280319650.jpg
Attached Image: monthly_07_2010/post-2554-1280319656.jpg
Attached Image: monthly_07_2010/post-2554-1280319660.jpg

#2 User is offline   Johanna 

  • Member
  • PipPip
  • Group: Members
  • Posts: 14
  • Joined: 01-July 10

Posted 29 July 2010 - 05:31 AM

Dmitri, I have done this type of work in the past and am now turning it to deeper carving on 3mil and 6mil glass and the thicker mirrors. It is an interesting hobby at the moment and on the piece that I have put on here, it is done on a piece of 3mil glass with the flowers cut in to a depth of at least 1mil and in places about 1.5mil.
On the mirrors, I take the back out of them, then carve into the back of a mirror, sometimes painting it after I have done the carving.
A sample of this , which is a very early one, is on the post " Another from Oz" in the Who's Who.
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users