The Carving Path: Edo Craft - The Carving Path

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Edo Craft Interesting web site

#1 User is offline   Janel 

  • Administrator
  • PipPipPip
  • Group: Admin
  • Posts: 3,237
  • Joined: 12-January 05
  • Gender:Not Telling
  • Location:Minnesota, USA

Posted 14 September 2005 - 02:11 AM

Hello all,

For want of a better place to put this I've posted here. I came across an interesting web site today: http://www.edocraft.com

My entry to the site was through an interview with an artist/craftsman, then I went to the home page, read a brief bit about Edocraft's owner and shop master :lol: , recommended early on in your look at the site. Further down the page, there is a Product Directory, which first goes to a list of craftsmen and products, but from there you can go to a page of what the person makes and from there you can go to an extensive interview with the craftsman. This site alone would take many days to read about all of the people who make the products offered, which are made by hand. I find this resource fascinating!

I have not looked everywhere, but have enjoyed the interview of Mr. Masao Nakanishi - Edo Sashimono Factory , and a brief look at the tools section.

This is quite a web site in my opinion!

Janel
Teachers open doors, you enter by yourself. Chinese proverb
What you can do, or dream you can, begin it; Boldness has genius, power and magic in it. ~ Goethe ~


Janel Jacobson's web site

#2 Guest_ford hallam_*

  • Group: Guests

Posted 14 September 2005 - 06:38 AM

Morning Janel and all,

It`s somewhat timely that you`ve posted a link to these craftsmen, I`m finally off to Japan next Thursday,( after too many delays! :lol: ) and on my itinery was a visit to the file maker. I`ve always fancied a set of hand made files like that. I don`t think they are particularly expensive at all. When I get back I`ll let you know how they perform.

sayonara,

Ford B)

#3 User is offline   Jim Kelso 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 1,360
  • Joined: 12-January 05
  • Location:Vermont

Posted 14 September 2005 - 11:53 AM

Ford, you lucky dog. One of the true pleasures for me in visiting Japan is going to these small
family industries. A bag of files ought to give the metal detectors fits. :lol:

Thanks Janel.
Our three most valuable tools: our thumbs, our imaginations, and our good-will.

My Webpage

#4 User is offline   Janel 

  • Administrator
  • PipPipPip
  • Group: Admin
  • Posts: 3,237
  • Joined: 12-January 05
  • Gender:Not Telling
  • Location:Minnesota, USA

Posted 14 September 2005 - 12:12 PM

Green with envy smiley!

Was the filemaker the one you are hoping to visit?

Can anyone explain single cut, triple cut, (rasp I can imagine). What is chequering and would you know what the #3 nd #7 mean? When left handed is mentioned, are the file cuts created in the opposite direction from the other files?

I wonder if there is a fine enough cut that resembles the fine little jewelers files I use when refining cuts and little places? Perhaps there are, in the last group for precious metal...

Your report on the tool maker you do visit is being looked forward to, Ford! I do wish you a very good time spent in Japan!

Janel
Teachers open doors, you enter by yourself. Chinese proverb
What you can do, or dream you can, begin it; Boldness has genius, power and magic in it. ~ Goethe ~


Janel Jacobson's web site

#5 User is offline   DFogg 

  • Administrator
  • PipPipPip
  • Group: Admin
  • Posts: 372
  • Joined: 11-January 05

Posted 14 September 2005 - 12:16 PM

Mr. Hideo Ishido's interview made me laugh. We couldn't be more a like. I envy your trip Ford and I want some files too. Thanks Janel, I will be ordering from these guys.

#6 User is offline   Jim Kelso 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 1,360
  • Joined: 12-January 05
  • Location:Vermont

Posted 14 September 2005 - 12:39 PM

You know the ones I want Ford: for banjo making! :lol:

Checkering is parallel rows of teeth on the file, to cut parallel lines one way, and then another in two intersecting directions. This forms small diamond(or squares) shaped "checkers" either for ornamentation or gripping as on firearms stocks or tool handles.
Our three most valuable tools: our thumbs, our imaginations, and our good-will.

My Webpage

#7 Guest_ford hallam_*

  • Group: Guests

Posted 14 September 2005 - 03:29 PM

Hey Jim, those would be the reverse inverted left-handed banjo files, I assume B)

Yes Janel, the file maker is the man I was planning on seeing. I found his site some time ago, I did`nt post a link as I thought I`d check them out first. Then there were the Delays :lol: .....

thanks for all the good wishes I`ll send you ( this forum ) a note from Tokyo if i can find an internet cafe.

regards, Ford

#8 User is offline   Doug Sanders 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 664
  • Joined: 19-January 05
  • Location:Indianapolis, IN USA

Posted 14 September 2005 - 08:02 PM

That eight-sided file looks really useful, but at 16,000 yen is a little out of my price range right now...
Have a great trip! Give us all a KAMPEI! when you're enjoying your sake.

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users