Jump to content
Ed Twilbeck

New Box Top

Recommended Posts

Started a new box top. Walnut with a dragon fly. So far I sized the top. Now I am carving away the background ,,, the top is 3/4 thick ,, carving about half thickness away. I used the knife to cut around the dragonfly and branch. Then with the reciprocating power chisel I removed most of the background down to the depth that I want.

The reciprocating power tool helps to remove wood quickly, A Carver friend , says I am cheating when I use it, because it cut so fast, even in hard woods. I use it instead of the rotary tool which makes a lot of dust, this makes a lot of chips and shavings.

If any one wants to see more , please let me know, and any comment are welcome.

post-107-0-52385300-1394835500.jpg

post-107-0-78772400-1394835551.jpg

Share this post


Link to post
Share on other sites

Hi Ed,

 

Thank you for posting. I was first attracted to the tool stand on the upper left of the image. Did you make that? It is an elegant solution for storage of those tools.

 

Then you mentioned the power tool, which makes chips instead of dust. That is an interesting attribute that has finally caught my attention. You have used it on a flat piece of wood. What do you think about how it would work on hand held boxwood for 3-D roughing out work?

 

I look forward to seeing this piece progress.

 

Janel

Share this post


Link to post
Share on other sites

Yes I did make the holder for the Flexcut chisels.

I have used the recipaticating tool to carve in the round, it works very well for that , quick removal of wood,

The tool comes with a set of chisels and I have some Flexcut chisels to go with it.

If needed I can post some other pics with the tool and chisels.

Share this post


Link to post
Share on other sites

love you chisel collection wish I had them love your work as always the power carver is that the same as the dremel with the carving end love to see more pics

Share this post


Link to post
Share on other sites

Janel I started a small carving with a peice of the Ligustrum, and I used the power carver to start the roughing out , hand held. I am not anywhere close to the finished rough out, but thought about your question about this tool.

If you have strong hands and don't mind the vibration with the tool,about like a dremel tool, you can carve down to a rough out.

I started with a 1X1" X about 4" peice of limb. About 10 minutes of work removed 2 corners, to make the flat sides ,,, as seen in the picture.

Hope this answers your question.

post-107-0-40544400-1395071768.jpg

Share this post


Link to post
Share on other sites

Thank you Ed,

Very interesting! I hope that I will have a chance to try one before too long. We do have a Woodcraft store on the south side of The Cities.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×