Jump to content
Marcus C.

Dragons, Novice mistake. Oh no.

Recommended Posts

Hi all.  

My brother saw the pendants I made for my mum and sister and he asked me for a dragon.

They are not my designs, but just part of my trail and error to learn. My brother is quite good with a pencil 

and is drawing up some things for me to try. That why I don't need to copy images from the net.

Anyway massive novice error. The dragon with the wings, I was happy with where I`d gotten and was sanding `n` singing `n` sanding very happily.

It still has a bit of a curve in the bone and moving it around in my vice to get at different angles. Slightly over tightened and crack, crack.

I`d put the whole piece in the vice instead of just the edge and with the curve in the bone, something had to give. All the time that went into it

I didn`t fell like remaking it, I made something a little simpler. Now grey grit from the sand paper is in the crack on the front of the piece,

Anything I can do?

I guess everyone has had their novice error, or brain fade. If anyone has any mistakes or simple errors that could be avoided I`d like to hear them.

students (1 of 2).jpg

students (2 of 2).jpg

Share this post


Link to post
Share on other sites

You have learned a hard lesson and I am sorry for the injury to the piece you have worked on.  You could do what some cultures do for precious pottery, by filling in the crack with a gold mixture.  I do not know the technique's materials, but perhaps you have seen this sort of thing. 

In the future I recommend that you learn how to hold the piece in your hand and brace it against a leather sand bag.   Or, my favorite because of its little bit of stickyness, a material that is used to stick posters to walls.  Either technique is performed on the end of my carving peg, which varies between carvers.

 

Carving peg:

Janel Jacobson at the bench

 

An old image of the peg with the poster-tacky-sticky-stuff on the end.  Using that stuff reduces the strain on the holding hand, and provides a gentle support to the materials being carved on it. 

Janel's Workbench

 

The sand bag can be seen just under this piece

DSC_0280_.jpg

 

Good wishes to you as you continue to learn!

Janel

 

 

Share this post


Link to post
Share on other sites

With wood I have taken some sanding dust ,the finer the better, and mix with some glue , with wood a good wood glue works well ,, with  bone I don't know what glue you use. I try to have almost twice the amount of sand dust that I think I will need  mix with glue to a wet putty looking mixture, some times I will add a drop or 2 of water, coat both pieces with the mixture and put them together and remove the squeez out and fill in all cracks chips, and  after glue cures , dries,  sand,or scrape smooth. I don't have any pics to show ,but would be glad to take some and show.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×